UA-61874121
Tool Steel Manufacturer, and Special Steel Stockholder
Call Us: +86-711-2390106

28NiCrMoV8-5 DIN1.6932 Alloy Structural Steels

28NiCrMoV8-5 DIN1.6932 Alloy Structural Steels alloy structural steel 28NiCrMoV8-5 DIN1.6932 Alloy Structural Steels 28NiCrMoV8 5 DIN1

28NiCrMoV8-5 DIN1.6932 Alloy Structural Steels

Description

The alloy structural steels are provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.

Application

The alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.

All Grades Comparison

DIN EN
1.6932 28NiCrMoV8-5

Quality Standard

EN 10250 Open steel die forgings for general engineering purposes. Alloy special steels

Chemical Composition(%)

C Mn Si P S Cr Ni Mo V
0.24-0.32 0.15-0.40 0.40 max 0.035 max 0.035 max 1.00-1.50 1.80-2.10 0.35-0.55 0.05-0.15

Mechanical Properties(T=20°C if not differently stated) with Quenched and Tempered Delivery Condition

Diameter(mm) Tensile Strength Rm (Mpa) Yield Strength Rp0.2 (Mpa) Elongation A5 (%) Impact Value Kv (J) Room Temperature
160 max 800 min 630 min 14 min 45 min
160-330 750 min 590 min 15 min 40 min
330-660 750 min 590 min 15 min 40 min

HEAT TREATMENT:

  • Hardening Temperature:830oC-870oC
  • Tempering Temperature:550oC-850oC
  • Forging:

    Hot forming temperature: 1050-850oC.

    Mill′s test certificate:

    EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.