manufacturer of tool steel, stainless steel, nickel alloy, alloy steel

M41 T11341 1.3246 HS2-9-1-8 High Speed Tool Steel

M41 T11341 1.3246 HS2-9-1-8 High Speed Tool Steel

M41 T11341 1.3246 HS2-9-1-8 High Speed Tool Steel

M41 T11341 1.3246 HS2-9-1-8 High Speed Tool Steel

M41 high speed steel American standard steel molybdenum high speed tool steel. The main features are fine carbide particles, uniform distribution, good toughness, but decarburization sensitivity and overheating sensitivity, thermal processing and heat treatment range narrow.

 

Features

This alloy is a High Speed, tungsten, molybdenum containing tool steel. It has good toughness along with hardness and is lower in cost than an equivalent tungsten (W) tool steel.

 

Applications

Primary application is as cutting tools for machining operations.

 

Equvialent

China GB standard grades W7Mo4Cr4V2Co5,
American AISI / ASTM standard M41,
United States UNS standard grade T11341,
International Organization for Standardization (ISO) standard grade HS2-9-1-8,
French NF standard grade HS7-4-2-5,
German DIN standard grade S74-2-5,
Germany DIN standard material number 1.3246,
British BS standard grade M41

 

Chemical composition

C(%) Si(%) Mn(%) P(%) S(%) Cr(%) Mo(%) V(%) W(%) Co(%)
1.05-11.5 0.15-0.50 0.20-0.60 ≤0.030 ≤0.030 3.75-4.50 3.25-4.25 1.75-2.25 6.25-7.00 4.75-5.75

 

Mechanical properties

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
439 (≥) 931 (≥) 41 41 13 Solution and Aging, Annealing, Ausaging, Q+T,etc 221

 

Machinability

Machinability of M41 is rated at 55% that of the W group water hardening low alloy tool steels which are at 100% as a machinability reference.

 

Forming

Forming of the alloy may be done in the annealed condition be conventional methods.

 

Heat Treatment

Preheat at 1450 F and then rapidly heat to 2250 F. Hold parts for 2 to 5 minutes and air cool, salt bath or oil quench.

Annealing:

Anneal at 1600 – 1650 F and slow cool in the furnace at less than 40 F per hour.

Tempering:

Temper at 1000 to 1100 F for at least one hour at temperature. Repeating the tempering operation twice more, for a triple temper, is recommended. Rockwell C hardness will be in the range of 70 to 65.

 

Forging

Forge at 2100 F down to 1750 F. Do not forge below 1700 F.

 

Cold Working

Cold working of M41 in the annealed condition may be done by conventional methods.

About Us

Founded in 1998, FuShun covers an area of 3000 square meters, annual sales volume of 20000 tons. We are engaged in the manufacture and export of Tool Steel, Nickel Alloy, Stainless Steel and other special steel products…,View more content About Me.

Contact Lists

General Manager: Ms. Florence

info@fushunspecialsteel.com

Get A Free Quote!

Fushun TEL: +86-731-89903933

Fushun FAX: +86-731-89853933

General Manager: Ms. Florence Tang

Whatsapp/Phone/WeChat:+86-13319591838

Find your steel grade and get a quote today.

NOW Send Your Inquiry To : info@fushunspecialsteel.com

Whatsapp:+86-18692275455

x