ASTM A705 covers age-hardening stainless steel forgings — the forged counterpart of the bar specification A564. It is what you buy when the part is a forging rather than a bar: 17-4PH valve bodies, 15-5PH shafts, 17-7PH components that were forged to shape.
Why there is a separate specification
Forging changes the product in ways a bar standard cannot cover: grain flow follows the shape, the section thickness varies, and the properties depend on how the forging was worked as well as on the grade. A705 addresses that with requirements on forging practice, heat treatment after forging and the test locations used to qualify the part.
The grade and the condition both matter
A705 follows the same convention as A564: the grade sets the composition, the condition sets the ageing treatment, and the strength follows from the condition.
| Condition | Ageing | Character |
|---|---|---|
| H900 | 480 °C | Highest strength, lowest toughness |
| H1025 | 550 °C | Balanced |
| H1150 | 620 °C | Best toughness and corrosion resistance |
What is not in the standard
The forging drawing, the stock allowance and the NDT requirement. If the part is a pressure-retaining forging, ultrasonic examination to A388 is usually imposed separately, and the acceptance level is agreed between buyer and forger — the material standard does not set it.
What to put on the purchase order
- Grade and condition together — “630 H1150”, not “630”
- Whether the forging is to be machined after ageing, and the stock allowance
- UT requirement and acceptance level, if pressure-retaining
- Test location and orientation, if the properties are direction-critical
- Certificate type and any third-party witness
Download the standard
ASTM A705 — Age-hardening stainless steel forgings (PDF)
Related reading
- ASTM A564 — the bar and shapes version of the same grades.
- Precipitation hardening stainless steels — how the four classes differ.
- ASTM A388 — the ultrasonic examination practice for heavy forgings.
