manufacturer of nickel alloy, stainless steel, tool steel, alloy steel

Forgings

Heavy forging is where a supplier is separated from a stockholder: the part is made to a drawing, not picked from a shelf. We forge shafts, rotors, rolls, rings, pressure vessel components and die blocks from ingots we control the melting route for, then test and certificate each piece against the drawing rather than against a catalogue.

What we forge

Shaft forgings (7)

Turbine, marine and gearbox shafts up to the largest ingot we can forge.

Rotors and discs (6)

Generator and turbine rotors, compressor discs, retaining rings.

Mill rolls (4)

Back-up, intermediate and work rolls for hot and cold strip mills.

Ring and flange forgings (4)

Seamless rings, nuclear flanges, wind turbine flanges.

Pressure vessel forgings (6)

Reactor, hydroprocessing and tubesheet forgings, including duplex and low temperature grades.

Blocks and heavy parts (5)

Die blocks, press columns, cylinders, crossbeams and shells.

How the order is quoted

Send the drawing, the finished weight, the material specification and the testing level. We come back with the ingot route, the forging ratio, the heat treatment cycle and the non-destructive testing schedule — ultrasonic to the severity you name, magnetic particle or dye penetrant on machined surfaces. Mechanical properties are taken from a sacrificial extension, not from a separately melted test bar, so the certificate describes the part you receive.

Marking, machining allowance and delivery condition (as forged, normalised, quenched and tempered, or rough machined) are agreed per order.

CoCrMo (F75) Master Alloy Ingot for Implant Casting

CoCrMo (F75) Master Alloy Ingot for Implant Casting

IN625 / GH3625 Atomization Rod for Corrosion-Resistant Powder

IN625 / GH3625 Atomization Rod for Corrosion-Resistant Powder

K417G (IN-100) Master Alloy Bar for Vacuum Cast Blades

K417G (IN-100) Master Alloy Bar for Vacuum Cast Blades

K438 (IN-738LC) Master Alloy Bar for Gas Turbine Castings

K438 (IN-738LC) Master Alloy Bar for Gas Turbine Castings

IN718 / GH4169 Atomization Rod for PREP, VIGA and EIGA

IN718 / GH4169 Atomization Rod for PREP, VIGA and EIGA

K418 (IN-713C) Master Alloy Bar for Investment Casting

K418 (IN-713C) Master Alloy Bar for Investment Casting

About Us

Founded in 1998, FuShun covers an area of 3000 square meters, annual sales volume of 20000 tons. We are engaged in the manufacture and export of Tool Steel, Nickel Alloy, Stainless Steel and other special steel products…,View more content About Me.

Contact Lists

General Manager: Ms. Florence

[email protected]

Get A Free Quote!

Find your steel grade and get a quote today.

NOW Send Your Inquiry To : [email protected]

x